- October 18, 2013
- Aviat Networks, cell phone networks, Hadi Choueiry, Internet Protocol, LTE, Quality of service, tdm, Telecommunications, Time-division multiplexing, Voice over Internet Protocol, Voice over IP
The transition from the Time Division Multiplexing (TDM) cell phone networks of the 2G and 3G mobile era has been a long time coming. However, the mobile industry seems to be at one of its proverbial inflection points where IP (Internet Protocol) technology is ascendant and TDM has begun the long but inevitable decline into legacy status.
Aviat Networks has been there all along the way, helping operators design and deploy aggregation systems. We’ve seen and learned a lot as some of the leading mobile phone carriers have upgraded their networks. Now as LTE works its way into mainstream status, cell phone networks are transitioning to full-IP, the underlying technology of LTE.
- July 11, 2013
- ACM, Africa, backhaul, Cell C, IP, LTE, MIMO, mobile cellular networks, MTN, Quality of service, South Africa, throughput improvement, Time-division multiplexing, Vodacom
LTE has been moving more and more to the forefront in mobile cellular networks around the world. Africa, and particularly the Republic of South Africa, is the latest hotbed of LTE rollouts, with the leading country operators of Vodacom, MTN and Cell C coming online since late in 2012. In conjunction with these LTE access rollouts, our technical marketing manager in the region, Mr. Siphiwe Nelwamondo, has been authoring a series of columns on enabling LTE in a leading regional technology media Internet site, ITWeb Africa.
Naturally, his focus has been on backhaul. In the first installment of his series, Mr. Nelwamondo looked closely at the backhaul requirements of LTE. Chief among these requirements are speed, Quality of Service (QoS) and capacity. He concluded that it is too early to close the book on the requisite parameters for supporting LTE backhaul. Part two of the features, he examined the basis on which microwave provides the technical underpinnings for LTE backhaul—especially as related to capacity. More spectrum, better spectral efficiency and more effective throughput were Mr. Nelwamondo’s subpoints to increasing capacity.
Having more spectrum for microwave backhaul is always nice, but it’s a finite resource and other RF-based equipment from satellites to garage door openers is in competition for it. Bettering spectral efficiency may be accomplished by traditional methods such as ACM and might be increased through unproven-in-microwave techniques like MIMO. Throughput improvement has wide claims from the plausible low single digit percentage increases to the more speculative of upping capacity by nearly half-again. Data compression and suppression are discussed. The truth is LTE, while data-intensive, probably will not require drastic measures for backhaul capacity until at least the next stage of LTE-Advanced.
If indeed capacity increases are necessary in the LTE backhaul, number three and the most current piece of Mr. Nelwamondo’s contains additional information. Nothing is better than having something bigger than normal or having many of the standard model. As the analogy applies to LTE microwave backhaul, bigger or wider channels will increase capacity, of course. A larger hose sprays more water. Or if you have two or three or more hoses pumping in parallel that will also support comparatively more water volume. The same is true of multiple microwave channels.
However, the most truly and cost effective capacity hiking approach is proper network planning. Mr. Nelwamondo points out that in Africa—more than some places—mobile operators are involved in transitioning from TDM planning to IP planning. While TDM planning was dependent on finding the peak traffic requirement per link, IP planning allows the flexibility to anticipate a normalized rate of traffic with contingencies to “borrow” capacity from elsewhere in a backhaul ring network that is not currently being utilized. Along with several other IP-related features, this makes determining the capacity a lot more of a gray area. Some operators solve this by simply “over-dimensioning” by providing too much bandwidth for the actual data throughput needed, but most cannot afford to do this.
The fourth and final entry in Mr. Nelwamondo’s series will appear soon on other LTE backhaul considerations of which you may not have thought. Sign up below to be notified when it is available. [contact-form-7 404 "Not Found"]
Aviat WTM 6000 trunking microwave radio
Back in the day, trunking microwave radios were huge power-hungry beasts that consumed vast quantities of power and space at equal rates. They were complex “animals” that took days to install and hours to configure. Then they had to be looked after like well-loved but aged members of the family—with care, all due respect and consideration. Over time, components went out of adjustment and had to be brought back into line through various tuning routines, but overall they did their job as the super-reliable backbone of the POTS (i.e., Plain Old Telephone Service).
Jump forward a few decades and the latest trunking microwave solutions are elegant and graceful—almost svelte. With their current high levels of electronic integration, a complete repeater system can stand in a single rack space—unheard of until the most recent products. Furthermore, these new systems consume dramatically less power—a typical 3+1 system (i.e., four transceivers) consumes less than 400 watts. So now, backbone operators can save significantly on operating expenditure because of decreased space and power requirements at their microwave radio shelters.
Evolving microwave systems from analog to digital microwave systems carrying digital payloads was a rocky and dangerous path. The next migration from TDM payloads to IP payloads appears to be just as treacherous. How can a traditional TDM backbone radio, typically configured with N+1 radio protection switching, be reconfigured to transport a non-TDM payload that does not suit N+1 switching? IP transport is a completely different environment altogether! Luckily, trunking radio system designers have not ignored the Internet revolution and are perfectly aware of these challenges. In fact, well-appointed trunking microwave radio systems allow a graceful evolution from TDM to IP, with capability to transport both types of traffic simultaneously—and with their own ultra-reliable protection schemes!
Today, trunking microwave radios can support both TDM and IP seamlessly, offer robust radio performance and highly reliable switching and really do make it easy for operators to design mission-critical backbone networks. They offer mean time between failure (MTBF) reliability figures into the hundreds-of-years and highly integrated yet modular designs, which make expansion very straightforward. Before deciding on a trunking microwave radio, consider if the system:
- Allows easy migration from TDM to IP with a minimal amount of replacement materials
- Can expand to an expected maximum channel capacity (for example, six channels) without needing additional racks, etc.
- Enables repeater configurations within one rack
- Has a field-proven heritage of reliability and performance
Senior Product Manager
- July 13, 2012
- 3GPP Long Term Evolution, 4G, backhaul, Broadband, Ethernet, FCC, Federal Communications Commission, FierceWireless, LTE, microwave, public safety, PublicSafety, Telecommunication, Telecommunications network, Time-division multiplexing
(Photo credit: Chance W. Haworth via Wikipedia)
Public safety agencies will soon experience a dramatic improvement in communications capabilities enabled by advances in technology. New broadband multimedia applications will give first responders and commanders alike far better situational awareness, thereby improving both the effectiveness and safety of all personnel charged with protecting the public.
The specific technology, now mandated by the U.S. Federal Communications Commission (FCC) for all new emergency communications networks, is Long Term Evolution, or LTE—a fourth-generation (4G) broadband solution. The FCC has also allocated licensed spectrum to ensure the best possible performance in these new networks. These FCC rulings support the goal of achieving an interoperable nationwide network for public safety agencies.
The FCC chose LTE based on its proven ability to support voice, video and data communications at remarkably high data rates that were previously only possible with wired links. Although there will be some differences in a nationwide public safety network involving capacity and coexistence with Land-Mobile Radio communications, lessons learned from LTE’s deployment in large-scale commercial mobile operator networks will help ensure agencies are able to achieve the FCC’s goal cost-effectively.
- July 10, 2012
- 3GPP Long Term Evolution, Africa, Ethernet, Internet Protocol, Kenya, Mobile network operator, Safaricom, tdm, Telecommunication, Time-division multiplexing, WiMAX
Burgeoning WiMAX and 3G data traffic from subscriber devices such as Safaricom’s Internet Broadband Dongle (with SIM Card) are driving the mobile operator to migrate from TDM to hybrid microwave backhaul. (Photo credit: whiteafrican via Flickr)
Migrating legacy mobile backhaul networks that were designed for TDM traffic to add support for high-speed Ethernet data for 3G and 4G mobile technologies is one of the biggest challenges for operators worldwide. Each case is unique and poses its own quirks and potential pitfalls. Mobile operators must juggle new technologies, cost pressures and the need to maintain existing services or risk driving customers to the competition.
For Safaricom, the leading mobile operator in Kenya and one of largest in all Africa, the case involved preserving its E1 capacity for voice calls and simultaneously adding Ethernet/IP bandwidth for burgeoning 3G and WiMAX data traffic. As many mobile operators have done in the past, Safaricom built its network over time. Many parts of the network are still legacy 2G TDM technology. However, things are changing rapidly, with 3G subscriber numbers up 85 percent in 2011 year over year.
Many of these subscribers are consuming ever-increasing amounts of data bandwidth. Safaricom’s TDM based backhaul, making use of Ethernet-to-E1 converters, is finding it hard to keep up with demand. To help resolve the situation, the operator called on Aviat Networks, one of its incumbent solution providers. Using its market leading hybrid radio solution, the modular Eclipse microwave networking platform, Aviat Networks enabled Safaricom to add IP data capacity as necessary while keeping E1 capacity for voice calls.
In addition, the stage has been set for Safaricom to make the eventual migration to all-IP backhaul. With the modular Eclipse platform, it can transition on its own schedule. For more information, read the complete Safaricom case study in the frame below or download the PDF:
- May 11, 2012
- Aviat Networks, bell system technical journal, Dick Laine, International Telecommunication Union, Internet Protocol, ITU-R, microwave, microwave link, microwave link design, microwave link error performance, Microwave transmission, Principal Engineer, Radio Head, Radio Head Video Technology Series, Radio Heads, Radiohead, reliability or error performance, Richard Laine, tdm, Time-division multiplexing, Vigants, wireless, wireless engineering
In the second episode of Aviat Networks’ Radio Head Technology Series, Principal Engineer Dick Laine explains ITU-R models for Fixed Wireless Systems.
As most radio engineers know, Vigants calculations, which are discussed in a broadly cited Bell System Technical Journal article, are widely used to determine reliability or error performance for microwave link design. In Video 2 of Aviat Networks’ popular Radio Head Technology Series, which is now available for viewing, Principal Engineer Dick Laine explains how he uses Vigants calculations in conjunction with the three completely separate ITU-R Fixed Wireless System (FWS) models for TDM.
Because of all these models, he likes to use Vigants calculations as a “sanity check” to see that he is close to the correct result for his path engineering plans. The free Aviat Networks’ Starlink wireless path engineering tool can be used to handle Vigants calculations for Aviat Networks’ and other vendors’ equipment.
Can’t wait to hear more of Dick’s experienced views on microwave radio transmission engineering? You can get ahead of the learning curve by registering for the series and get these videos sent to your inbox as soon as they are released.
Wireless Security Components
Traditionally, microwave networks have been unsecure—unsecure as far as any purpose-built payload encryption or secure management is concerned. Until recently, it was deemed essential only for the most confidential microwave communications of financial firms, defense agencies and government, where the law can require them. But now billions of people around the world rely on the Internet to deliver varies types of data traffic ranging from personal messages to financial transactions. This value and volume of traffic makes it an irresistible target for cyber criminals. As security measures are implemented in other parts of the network (core, access) it is fundamental to implement strong security measures in microwave networks.
Aviat Networks Strong Security suite for the Eclipse Packet Node microwave radio platform prevents the following attacks on the network:
Front door attack: Traditionally microwave networks have not encrypted their payloads. With many networks transitioning from TDM to IP not encrypting payload traffic is the equivalent “of leaving the front door unlocked.” Hackers, cyber criminals and even foreign governments could try to access the air link using methods such as the “man in the middle” to read unencrypted data streams. Aviat Networks’ solution is to implement Payload Encryption that protects all traffic over the air link including user data and Eclipse management data in the payload.
Backdoor attack: Unsecured NMS can be used to change the radio configuration, sabotage or divert traffic using network management. With Aviat Networks’ Secure Management all Eclipse Packet Node management and control commands are secured over unsecure networks.
Insider attack: Disgruntled employees or cyber criminals that have obtained inside access to the network can use this access to divert traffic or upload malware to the network. Aviat Networks implements complete AAA (Authentication, Authorization and Accounting) capability through a RADIUS server that can be used to prevent, or if happens, track and identify an inside security breach.
Covering all vulnerable areas of a microwave network, Aviat Networks’ Strong Security provides the toughest standards-compliant security protection in the market.
Marketing Engineering Specialist
What is the best migration strategy for utility networks migrating to Smart Grid using Hybrid Radios? We look at the technology choices that are available to support legacy TDM and IP-based services and investigate the many demands placed on utility networks. Demands include seamless migration, increased capacity, security, and interoperability.
We believe a hybrid network is the best solution and we explain why in this white paper:
A network without synchronization is like an orchestra without a conductor.
Our partner, Symmetricom, recently announced the launching of a new segment of their SyncWorld ecosystem for microwave backhaul. Our hat’s off to them; this is great news for Symmetricom and the new players that are now on board. We boarded this train awhile back. After a couple years of collaborative testing between us, we first joined the ecosystem when it was initially launched in March at CTIA 2011.
So, what have we learned since then you might ask?
Well for one, packet based timing is still growing in interest, evaluation, and deployment. Customers around the world — including mobile operators, state and utility providers and others – are increasingly looking for timing solutions that operate over their Ethernet fiber and microwave network as effectively as their TDM timing solutions do. A recent Heavy Reading analyst report projects close to 2 million cell sites will have deployed the two most dominant solutions, IEEE 1588v2 and Synchronous Ethernet (SyncE), by 2015.
Secondly, we’ve learned this is by no means the technology race it started out to be. Remember when Blu-ray and HD–DVD were competing a few years ago? Or perhaps that has well faded into memory. Well, I still recall the industry buzz a couple years ago about whether Synchronous Ethernet (SyncE) was going to kill IEEE 1588v2, or vice-versa. Who was going to come out on top?
Telecom watchers and players are always primed for a tech battle it seems. Well lo and behold; this battle has become more of an alliance, as of late.
The dominant discussion today is now about how BOTH these technologies can co-exist, and where best to deploy them in a network, either side by side or in parallel, with one backing up the other. Hmmm, now that’s an interesting conclusion to a tech battle.
Case in point, a couple of our customers are planning to deploy both technologies to take advantage of their respective strengths and are in the process of doing just this. See this whitepaper for more information about synchronization over microwave backhaul or maybe this one for insight into deploying IEEE1588v2 synchronization.
So, with the reality today that packet timing is still growing and that options for packet timing (including TDM, 1588v2, SyncE, and GPS) will continue to co-exist for a long time, it becomes even more critical to seek experience when it comes to planning your sync migration.
An ecosystem is probably a good place to start, especially with those players that have been at it for some time.
Sr. Manager, Solutions Marketing
- August 23, 2011
- Aviat Networks, backhaul, Dick Laine, Frequency range, Internet Protocol, microwave, Microwave transmission, Principal Engineer, Rain Attenuation, Rain Fade, Rain Fading, Telecommunication, Time-division multiplexing, wireless
Image via Wikipedia
Rain fading (also referred to as rain attenuation) at the higher microwave frequencies (“millimeter wave” bands) has been under study for more than 60 years. Much is known about the qualitative aspects, but the problems faced by microwave transmission engineers—who must make quantitative estimates of the probability distribution of the rainfall attenuation for a given frequency band as a function of path length and geographic area—remains a most interesting challenge, albeit now greatly assisted by computer rain models.
A surprising piece of the puzzle is that the total annual rainfall in an area has almost no correlation to the rain attenuation for that area. A day with one inch of rainfall may have a path outage due to a short period of extremely high localized rain cell intensity, while another day of rain may experience little or no path attenuation because rain is spread over a long period of time, or the high intensity rain cell could miss the microwave hop completely.
Over the years, we have learned a lot about deploying millimeter wave microwave hops for our customers:
- Rain outage approximately doubles in each higher millimeter wave band, e.g. 18 to 23 GHz
- Rain outage is directly proportional to path length—assuming a constant fade margin for each hop
- Rain outage in tandem-connected short hops is the same as for a single long hop—if they have the same fade margin
- Multipath fading in optimally aligned millimeter wave hops does not occur during periods of heavy rainfall, so the entire path fade margin is available to combat rain attenuation fades
More information about assessing rain-induced attenuation is available in our white paper, Rain Fading in Microwave Networks.